High Torque Continuous Sweep Mini Movement 6 mm

$32.50

Pricing Discounts

QTY PRICE (PER UNIT)
5 + $30.00

QUANTITY

Bulk discounts Bulk Discounts Free shipping Fast Delivery Click and collect Click & Collect

High Torque Continuous Sweep Movement.

This silent movement will work hands up to 450mm. It can also work a seconds sweep as well.

It is designed to go through a dial thicknessesof up to 6 mm.  This can be extended to a thickness of 8 mm if you use a a barrel nut.


The hands shaft on this  movement allows a good distance between the hour and minute hands so that HT hands can move freely as per the photo.

Clock Hands need to be purchased separately.

 

Overall shaft length
                         24mm

     

Threaded shaft length  
         9 mm
suits dials up to 6mm.

 

To check that this movement will meet your requirements carefully measure the thickness of the material that the clock shaft needs to go through, (this is the dial thickness).  The  movement is suited to go through 6 mm of material ( timber,  ceramic etc.)

 

Dial Thickness

Threaded Shaft

Overall Shaft 

HT8AACS

8mm

10mm

    24mm

Remember it is better to purchase slightly larger rather than smaller.

Movement Dimensions             55 x 55 x 15 mm 

Diameter of  threaded shaft.     8 mm 

Life expectancy                       10+ years  approx.

Accuracy                                 within 2 minutes per year.

Battery  size                            AA

These prices include the clock movement & necessary hardware.

This movement is suitable for hands on this website up to 450mm long.

If you are replacing a movement on an old clock it is still advisable to purchase new hands.  It will give the clock a nice fresh look and it assures a good fit. If you plan to use the existing hands with the new movement the minute hand must be the "i" shaft style that is held on with a little nut.

Hands are often not interchangeable from brand to brand so it is cheaper to purchase new hands when buying the clock movement rather than discover that the old hands don't fit and have to place a new order for them.

Firstly - Gentle does it-do not overtighten the nuts- it will damage the clocks.

Janine's tip.  Remember to check that there will be enough room between the clock dial and the clock lens when repairing or making a clock that has a protective glass on the front.  You need at least 14 mm clearance to prevent the hands from touching the glass.

We accept
  • Visa
  • Mastercard
  • PayPal
  • Direct Deposit