seiko continuous sweep mov.| Enlarge
  • Seiko Hardware kit|

Seiko Continuous Sweep Movement 6mm

From: $30.00

Pricing chart
Qty Price (per unit)
1 - 4 $30.00
5 - 9 $26.00
10+ $25.00

Seiko High Torque Continuous Sweep Movement.

  • These seiko continuous sweep movements are highly sought after by clock repairers and makers.
  • They do not have a ticking sound-the hands move around the clock in a gliding motion.
  • These clocks can work lightweight hands up to 200mm
  • Not suitable for the HT Retro hands on this website or the HT tapered hands.
  • These prices include the clock movement & necessary hardware.
  • Hands & Numbers need to be ordered separately


Pin It

This movement is available in only 1 shaft size to suit dial thicknesses up to 6mm

These clocks are sold by dial thickness

  Dial Thicknes Threaded Shaft Overall  Shaft Length
QCS-CSS 6mm 8mm 16mm


Movement Dimensions  55 x 55 x 15 mm 

Diameter of  threaded shaft.     8 mm 

Warranty                                3 yrs *

Battery  size  AA

 * Warranty does not include battery leakage or misuse.

Janines Tip .  These clock movements suit lightweight well balanced hands up to 350mm ( minute hand centre to tip). Not suitable for the HT Retro hands.

Shorter hands work even better.

I personally would suggest that for high torque hands you use one a high torque movement as they have a bit more clearance between the hour & minute hand.

If you are repairing a clock movement it is still advisable to purchase new hands as well as giving the clock a nice fresh look it assures a good fit. ( It is easy to damage the clock shaft when attempting to fit wrongly bushed hands and this is not covered by warranty)

Note 3/8"= 10mm






  • I have been tested at the shop before packing and have arrived ready to give you many years of accurate tick tocking.
  • I want us to have a long and happy relationship so here are my rules.
  • Ouch don’t use pliers to tighten the hex nut!!! Gently finger tighten only!!!!!!   (I wouldn’t use pliers on you!) 
  • Using hands designed to work on a different brand / style of clock may damage me and will void the warranty.
  • I am not designed for weight bearing.    Ensure that the clock shaft is not responsible for bearing the weight of the clock.
  • If my hour hand seems too tight. Gently scrape the inside of the hole with a penknife blade to enlarge the hole.   Don’t try and force me onto the hour shaft
  • I hate fumes  - make sure that I can breathe.  Timber and thinner fumes get into the plastic workings and clog them up….
  • For high Torque movements please don’t bend the hands- when they are on the clock. The large hands can damage the movement when they are bent whilst still on the clock.  Remove the hands to do this and then put them back on the clock.
  • If you treat me right I will be accurate to within 2 minutes per year and last for about 10 yrs. 

When you receive your Seiko clock movement it will have the letters on the back SKP.

Click on this link if you would like to know more about the SEIKO brand and the very confusing SKP on the back!


Get In Touch

  (07) 5520 4422

Trading Hours

Mon - Friday 9am-3pm.

Please feel free to Contact us via email or phone.