USA Made Mini High Torque Movement 16mm
US made Takane Mini Quartz High Torque Clock Movements.
For Hands up to 450mm
These movements are available in 2 different shaft sizes to suit dial thicknesses up to 10mm and up to 16mm.
To choose the proper shaft length size carefully measure the thickness of the material that the clock shaft needs to go through.
These clocks are sold by dial thickness and a variety of shaft lengths may be combined to obtain a quantity discount which is calculated at the checkout.
|Dial Thickness||Threaded Shaft||Overall Shaft|
If in doubt which size you will need it is better to purchase slightly larger rather than smaller.
Movement Dimensions 55 x 55 x 15 mm
Diameter of threaded shaft. 8 mm
Life expectancy 10 years
Accuracy within 2 minutes per year.
Battery size AA
These prices include the clock movement & necessary hardware.
Hands and Numbers need to be ordered separately.
Janines tip . Remember to check that there will be enough room between the clock dial and the clock lens when repairing or making a clock. You need 12mm to prevent the hands from touching the glass.
This movement will work all of the hands on this website up to and including hands 450mm long.
It is often best to purchase new hands when purchasing a new clock movement to ensure everything is going to fit perfectly.
If you are repairing a clock and have a set of hands from the exisitng clock that you would like to use you will most likely be able to use them if minute hand will need to be the "I" shaft style which means that minute hands is held on by a small nut.