High Torque Movement 10mm-16mm

QTY	PRICE (PER UNIT)
5–9	$12.50
10–19	$10.00
20 +	$8.00

On Special

Quartex High Torque Clock Movement.

To suit Dial thicknesses of up to 6 mm thick.

These movements are ideal to use with all hands on the website up to 180mm as well as some of the HT Retro Hands and the following HT hands.

Minute hand length 200 mm HTHS200,

Minute hand length 250 mm Spade 250 White, Silver ,Black ,Gold.

250 mm Contempory Black

These clocks are sold by dial thickness.

	Dial Thickness	Threaded Shaft	Overall Shaft
HTE6AA	6 mm	9 mm	17 mm

If in doubt which size you will need it is better to purchase slightly larger rather than smaller.

Movement Dimensions 55 x 55 x 15 mm

Diameter of threaded shaft. 8 mm

Life expectancy 3 years

Accuracy within 2 minutes per year.

Battery size AA

These prices include the clock movement & necessary hardware.

Janines tip . Remember to check that there will be enough room between the clock dial and the clock lens when repairing or making a clock. You need at least 15mm to prevent the hands from touching the glass.

It is often best to purchase new hands when purchasing a new clock movement to ensure everything is going to fit perfectly and the hands are balanced accurately.

If you are repairing a clock and have a set of hands from the exisitng clock that you would like to use you will most likely be able to use them if minute hand will need to be the "I" shaft style which means that minute hands is held on by a small nut. If you are unsure please feel free to contact us.

If you are repairing a clock movement it is still advisable to purchase new hands as well as giving the clock a nice fresh look it assures a good fit. (It is easy to damage the clock shaft when attempting to fit wrongly bushed hands and this is not covered by warranty.)

I have been tested at the shop before packing and have arrived ready to give you many years of accurate tick tocking.
I want us to have a long and happy relationship so here are my rules.
Ouch don’t use pliers to tighten the hex nut!!! Gently finger tighten only!!!!!! (I wouldn’t use pliers on you!)
Using hands designed to work on a different brand / style of clock may damage me and will void the warranty.
I am not designed for weight bearing. Ensure that the clock shaft is not responsible for bearing the weight of the clock.
DOUBLE SIDED TAPE IS A GREAT WAY TO SECURE THE MOVEMENT TO THE BACK OF THE FACE OF THE CLOCK.
If my hour hand seems too tight. Gently scrape the inside of the hole with a penknife blade to enlarge the hole. Don’t try and force me onto the hour shaft
I hate fumes - make sure that I can breathe. Timber and thinner fumes get into the plastic workings and clog them up….
For high Torque movements please don’t bend the hands- when they are on the clock. The large hands can damage the movement when they are bent whilst still on the clock. Remove the hands to do this and then put them back on the clock.
If you treat me right I will be accurate to within 2 minutes per year and last for about 10 yrs.

These are made by Quartex a well known USA company that has been supplying clock parts since the 1980's. These movements are made in their China factory.

They are supplied with a cap nut ,open nut, hex nut , gold washer , rubber washer & a metal hanger.

Warranty 12 Months.